How to keep sliver

Many people like silver, but not know how to maintain it, even think that silver is very difficult to maintain, and is not the case. Chemical properties of silver and gold than platinum and stability, often due to air in the water or other chemical substances oxidation and loss of gloss black or turn yellow in the understanding of this feature, we just spend little bit of life often reads minds, can be worn so that his silver is sustainable, such as new.

Do not wear silver at the same time, other precious metals to wear jewelry, so as to avoid collision deformation or scratches.

Maintain the silver dry, do not wear swimming away from the hot springs and sea water. Wear exhausted every available surface, cotton swab or tissue paper to remove water and dirt, and then embedded in sealed bags to avoid contact with air.

The best way to silver and maintenance to wear every day, because the body can produce the natural oils and fats moist sheen. With fine and three-dimensional sculpture made of silver, to avoid deliberately wipe light. If it is found silver there are signs of yellowing, you should use a small brush to clean silver jewelry jewelry slits, and then wipe the surface of silver cloth swab, you can restore the original silver so silver and bright.

In this proposal you: If you use silver polishing cloth to restore some Bacheng the silver position, we do not need to use silver polishing silver milk and wash water, because these products have a certain corrosive, silver, after the use of these products will be increasingly at risk of yellowing. Silver cloth containing silver and maintenance components, can not be washed. If you are not following the usual wear silver in the processing and collection, they are most likely to silver black. Then you should use a small brush to clean jewelry jewelry slits, and then wipe a drop of silver in the emulsion droplet surface paper, the silver surface of the black oxide unhealed, and then wipe silver jewelry cloth to restore the original light. We must always remember that after the general maintenance of good reads, and to avoid the silver again, black, silver in the black after several difficult rubbing white.

These are some basic considerations, the following further detail about the electroplating silver plating with non-maintenance method: one must first identify whether the availability of electroplating; (generally divided into a silver plating and no plating) A. There plating Silver jewelry: that the inner layer of pure silver, the surface do current handling; electroplating in general is divided into electric gold and platinum; identification method of electroplating the surface rendering of the luster of its sterling to serve the more light, as the mirror in general, reflective good effect and is more easily oxidized (as determined by the thickness of plating oxidation time). Simple handling of silver plated jewelry as follows:

1. Rock in the vicinity of pharmacy or pharmacy to buy a pack of alum;

2. And then you have to wear the silver jewelry in order to “water-10: alum a” ratio of water boiled ( Water must be boiling);

3. Remove the silver jewelry into cold water with a soft brush (such as: toothbrush) coated with milk or toothpaste or laundry washing off salads;

4. with hair dryer dry, then wipe with chamois can be bright as new ; the above categories can handle plating silver necklace for a. (thickness Jie Ke) b. pendant c. ring (with or without precious stones and cordials) d. bracelet. Hand Ring (thickness Jie Ke) e. silver jewelry on the There inlaid plastic sort of B. electroless silver jewelry: I am very easy to lose their luster due to sulfide, (for sulfur dioxide chemical reaction of sulfur and silver sulfide to form a layer of silver in silver jewelry on its principle may be applied after the cut open Apple will gradually darken the same). Simple handling Electroless silver jewelry is as follows:

1. Rock in the vicinity of pharmacy or pharmacy to buy a pack of alum;

2. And then you have to wear the silver jewelry in order to “water-10: alum a” ratio of water boiled (water must be boiling);

3. Remove the silver jewelry into cold water with a soft brush (such as: toothbrush) coated with milk or toothpaste or laundry washing off salads;

4. with hair dryer dry, then wipe with chamois can be bright as new; the above types of silver plating can be dealt with as a a. necklace (thickness Jieke) b. pendant c. ring (with or without precious stones and cordials) d. bracelet. Hand Ring (thickness Jie Ke) e. silver jewelry inlaid plastic like there is no plating of

B. Silver jewelry: I am very easy to lose their luster due to sulfide, (for sulfur dioxide chemical reaction of sulfur and silver sulfide to form a layer of silver in silver jewelry on its principle may be applied after the cut open the apple will slowly darken the same). Simple handling Electroless silver jewelry is as follows: (Note: The following methods are limited silver jewelry: a. silver jewelry inlaid plastic on the class / b. a curing treatment (curing treatment: the silver purchase, at Silver with black part of the pattern, if totem, carved in black text) 1. the use of fire (the lighter can) roasted silver jewelry, the destruction of their surface structure, baking time, depending on the size of the coarse and fine silver Tiffany & co jewelry, commonly known : fire); 2. Cooling alum and then put them in boiling water, boil and then remove the silver ornaments placed in cold water with a soft brush (such as: toothbrush) coated with milk or toothpaste or laundry washing off salads; 3. hair dryer to dry, and finally silver polishing cloth or swab to rub silver ornaments, silver color can be shown;

Over electroless silver jewelry approach should note the following points:

1. thin silver necklace or a fine ” gone too far “when you stay in the same location can not be too long;

2. Xiangbao Dan silver jewelry on the” excesses “, the can not be directly immersed in cold water, have to wait their natural cooling, otherwise the stones easily broken;

3. Fine silver Tiffany  jewelry cleaning available iron brush, the effect better (only fine silver in order to iron brush to clear first);

4. usual care available when silver cloth or wipe wipe wipe silver can, if your silver jewelry has been unable to wipe cloth or swab silver polish, you can use the above method (can not use silver polishing cloth or swab wipe silver situation is that you do not care for too long Hello!) Do not use water or swab wash silver silver paste, it is just a temporary chemical of medicine to your jewelry bright approach, medicine harmful to human beings, and the effect each time the poor will be hurt if the extent of silver Pingguo Pi cut off the same;

 5. if it wanted to buy back the new silver is more light and to avoid the dark, can be coated on its surface a thin layer of transparent nail polish, after a further smear once every 10 days. To remove the nail polish can be used banana immersed in water, after water washing can be.

Maintenance and the best way to clean silver Tiffany jewelrys What is this? The best way is to every day wear silver and maintenance, because the body’s fat would send moist natural gloss silver (of course, was also an exception, some of the sweat in itself contains the ingredients to make silver black). Normally closed when not wearing a good, preferably fitted with airtight pockets is good, to prevent the silver surface and exposed to the air oxidized black. When we use every day wear soft cloth silver surface, in order to maintain luster. However, preferably a dedicated cleaning silver cloth. Usual soil washing methods:Squeeze a little toothpaste on silver top, add a little water and rub to the appropriate starting small white bubbles, and then rinse with water can be restored light.